How to Install a Carbon Filter – Info

Without using soil, hydroponics is all about growing plants. Plants are grown in alternative media, such as coir, rockwool, water-based media, etc, in hydroponic gardening. Another essential aspect of hydroponics is air-filtration. Growing plants need a daily fresh air supply to prepare their meals. Since most hydroponic gardens are in an indoor environment , it is important to consider having a daily supply of fresh air. Get more info about Pacific Coast Carbon LLC.

Tungsten carbon philtres

The best air filtration solution for hydroponics gardens is carbon philtres. They are relatively cheap, simple to use, and effective. In addition to filtering air, carbon philtres often capture odour molecules, created mainly from vegetable plants. Therefore, the dual purpose of carbon philtres is to boost air circulation and keep it odour-free.

Charcoal carbon philtres, particularly the IGS Goblin and PHAT Hydro philtres are the most common air philtres available. They contain activated charcoal, which is a form of carbon that is processed. This form of carbon has several minute pores in it, and a large surface area for chemical reactions to participate. Contaminant particles are stuck in the pores as air passes through the philtre and the activated carbon neutralises them.

A Carbon Filter Installation

It is very quick to add a carbon philtre, and it takes only a couple of minutes. The IGS and PHAT philtres must simply be hanging over the plants or put next to them on the field. With individuals looking for a HydroHut grow room compatible philtre, these philtres are particularly common.

You can only mount your carbon philtre over it if you have already installed an exhaust fan for your greenhouse. These philtres are available as scrubbers with charcoal fibre and can be used in front of any exhaust fan. The philtre is affixed to the fan’s input side. Using tape, hooks or clamps, you can attach the philtre. Alternatively, a small duct that joins the philtre to the fan can be formed. With this method, the only precaution to take is to check that the philtre is placed above the plants at a sufficient distance. This allows air until it is filtered to circulate around the plants.

Replacement of the Filter

Over time, contaminants fill the pores in the carbon philtre, and there is no room for more contaminant molecules in the philtre. You’ll need to replace your philtre with a new one when that happens. Most carbon philtres have to be replaced about 12-18 months after installation.